Juno JKSN807F5 Instrukcja Użytkownika Pobierz pdf (Strona 24)

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting.

Touch to decrease the heat setting.

Touch and at the same time to

deactivate the cooking zone.

Activating and deactivating the

outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To activate more outer rings: touch the

same sensor field again. The subsequent

indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

When you activate the zone but

do not activate the outer ring

the light that comes out from

the zone may cover the outer

ring. It does not mean that the

outer ring is activated. To see if

the ring is activated check the

indicator.

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch until the correct heat

setting comes on. After 3 seconds

comes on.

To deactivate the function: touch .

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch again

and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch or of the timer to set the

time (00 - 99 minutes). When the indicator

of the cooking zone starts to flash slowly

the time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag